SEVERIN DK 1013 Manual download pdf (Page 2)

Dear Customer,

Before using the appliance, the user should

read the following instructions carefully.

Connection to the mains supply

The appliance should only be connected to

an earthed socket installed in accordance

with the regulations.

Make sure that the supply voltage

corresponds with the voltage marked on the

rating label. This product complies with all

binding CE labelling directives.

Important safety instructions

● Before the appliance is used, the main

body as well as any attachment fitted

should be checked thoroughly for any

defects. Should the appliance, for

instance, have been dropped onto a hard

surface, it must not be used any longer:

even invisible damage may have adverse

effects on the operational safety of the

appliance.

● The accessible housing surfaces may

become very hot during operation.

● This appliance is not intended for use by

any person (including children) with

reduced physical, sensory or mental

capabilities, or lacking experience and

knowledge, unless they have been given

supervision or instruction concerning the

use of the appliance by a person

responsible for their safety.

● Children should be supervised to ensure

that they do not play with the appliance.

● Do not leave the appliance unattended

while in use.

● Caution:

When overheated, food may tend to

ignite. However, the likelihood of this

occurring is increased where food with a

high fat or oil content is concerned.

● Do not position or operate the appliance

close to or underneath any wall-

cupboards or hanging objects such as

curtains or any other inflammable

materials.

● During operation, the appliance must be

placed on a heat-resistant surface,

impervious to splashes, stains or hot

steam. The feet should always be fully

extended to allow for the maximum

distance between the appliance and the

work surface.

● Always switch off and remove the plug

from the wall socket after use, as well as

- in cases of any malfunction and,

- during cleaning.

● When removing the plug from the wall

socket, never pull on the power cord;

always grip the plug itself.

● Do not let the power cord hang free.

● Keep its power cord, or that of any other

appliances well away from any hot parts

of the plate at all times.

● The appliance is not intended to be

operated by means of an exter-nal timer

or separate remote-control system.

● No responsibility will be accepted if

damage results from improper use, or if

these instructions are not complied with.

● This appliance is intended for domestic

use only and not for commercial

applications.

● In order to comply with safety

regulations and to avoid hazards, re-pairs

of electrical appliances must be carried

out by qualified per-sonnel, including the

replacement of the power cord. If repairs

are needed, please send the appliance to

one of our customer service departments.

The address can be found in the

appendix to this manual.

Start up

Before using the appliance for the first time,

let it heat up for approximately 3 minutes at

maximum power, while ensuring sufficient

ventilation. This will help to ‘burn in’ the

protective coating which safeguards the hot-

plate against corrosion. During this process,

a slight smell and a little smoke may be

Electric table-top hot-

plates



6

1 2 3

Comments to this Manuals

No comments